Design Guidelines

Design guidelines providing instructions for design considerations, including file exporting procedures & color selection for polyjet multi-color parts.

These guidelines are to be used as a starting point in understanding the basic aspects of part design and preparation for DMLM

Download this design tip sheet to learn: DMLM standard tolerances, tips for angles and self-supporting features, material selection guide, processing steps for DMLM parts.

These guidelines are to be used as a starting point in understanding the basic aspects of part design and preparation for Fused Deposition Modeling.

Design guidelines providing instructions for design considerations, including file exporting procedures & color selection for polyjet parts.

Injection Molding is used for manufacturing a variety of parts, from small components like AAA battery boxes to large components like truck body panels.

A report showing a month of prototype output from Stratasys Direct Manufacturing Austin showing distinctions about parts built with LS technology.

Design guidelines providing instructions for design considerations, including file exporting procedures & color selection for polyjet multi-color parts.

Discover key design considerations for the Selective Laser Sintering process.

Laser Sintering allows for the fabrication of complex parts that would be cost-prohibitive, if not impossible, to produce through traditional manufacturing.

Design guidelines providing instructions for design considerations, including file exporting procedures & color selection for stereolithography parts.

These guidelines are to be used as a starting point in understanding the basic aspects of part design and preparation for urethane casting.